Trex 600 ESP 5 Blade Head Hughes 500D with 600mm FRP Blades
Stumble Upon
Del.icio.us
Buzz
Related posts:
- Trex 600 ESP Scale RC Helicopter Hughes 500 Night Flying
- Dragonfly RC Helicopter Hughes 300 9093
- Syma Fairy Authentic Hughes 300 Syma Mini RC Helicopter
- advanced rc helicopter flying TREX 600 flown by CYNOSAM best vid of the lot N3M1S1S
- Mini Hughes 300 RC Dragonfly Syma Fairy Remote Control Helicopter
very nicely done bruv 5*
Niceeeeeeeeeee !!!
Nice job and excellent scale flying. Scale flying like this it tougher than it looks.
What head is that and are you using a head gyro? Also those blades look like they are standard 600mm blades are they?
Superb look and flight. Super uber soft start also….
Wow, that is one SUPER FINE heli! Jiyozu!
That heli looks supurb. It also looks as though you have no lack of piloting skill either. I’d say you got one really nice setup for the money.
Awesome setup, flies brilliantly!! Is it using the stock motor? if not , which motor/KV/pinion are you using and how many amps are you pulling.
Regards, Paul.
Thanks!
Also there should be no smoke comming out from the fuselage. That’s why I’m stuck on electric. Of course turbine is on my wish list, someday…
I went for 600mm from at the beginning.
Also I used 325mm blades for 450 size penta blade heads.
I know that the rule of thumb for the multi blade head is to use shorter blades. However, it simply looks odd and does not look right for scale heli.
I had to solve multiple issues to set it up right though…
That’s awesome. About the blade lenght, was 500mm or 550mm an option for you or did you go for 600mm right away?
I get 12min with 6S2P 8000mAh and
14 min with 6S2P 10000mAh.
I’m using two packs to have better balance in CG.
Excellent setup. What flight time are you getting?
Beautiful! I love the scale startup & shutdown sounds.
perfect set up, beautiful machine, nice piloting skill (specialy at night)
tell us how did you get all those blades tracking so well ????????
Very cool heli, what pinion you use. 6s battery. 650 align motor.
Sounds realistic @ 2:22!
Nice bird!
i was going to get a 401 and the sk-360 —it will be going on a trex500 with a heli-artist 5 bladed rotorhead—fuselage sea-king—-4 bladed tail—–have all but gyro/sk–is above good–price under $400usd
Yes! It’s a pricey 2300USD toy.
I would say, it’s a toy for grown-ups.
Good Luck!
Wow–i guest i need to get a gyro also with the SK-360 –man more money—Thanks for info—-Take care
Yes, I use JR’s G770T (same as G770-3D) with 8900G for the tail. It’s one the best gyro combos that I have ever tested. Also I use longer tail blades (105mm) to have better tail authority.
Thanks for info—will buy one—Cool—take care
Very Nice Helicopter there!! Your flying and landing was Awesome!
I use SK-360s for all multi blade helis.
Nice –are using any help from a cyclic gyro?